Creating a Client Configuration—Quick Configuration (Dynamic VPNs)

You can use J-Web Quick Configuration to quickly create or modify a client configuration that downloads to the user’s computer along with the Access Manager client.

Before You Begin
For background information, read: "Dynamic Virtual Private Networks (VPNs)" chapter in the JUNOS Software Security Configuration Guide.

Before You Begin

For background information, read:

"Dynamic Virtual Private Networks (VPNs)" chapter in the JUNOS Software Security Configuration Guide.

Client Configuration Quick Configuration Page shows the configuration options where you create a new client configuration.

To create or modify a client configuration with Quick Configuration:

Select Configure>IPSec VPN>Dynamic VPN>Global Settings.
To modify an existing configuration, click the appropriate link in the Client VPN Configuration column to go to the configuration page. Or, select the client configuration from among those listed and click one of the following buttons:
- To apply the configuration, click Apply.
- To delete the configuration, click Delete.
To create a new client configuration, click Add.
Fill in the options as described in Table 93.
Click one of the following buttons:
- To apply the configuration, click OK.
- To cancel the configuration and return to the main Configuration page, click Cancel.

Table 93: Client VPN Configuration Options

Field	Function	Action
Client Configuration
Name	Name to identify the client configuration.	Enter a name.
IPSec VPN	IKE AutoKey configuration to use when establishing the VPN tunnel.	Select a previously created IKE AutoKey configuration.
Remote Address
Remote Sources IP	IP address and netmask of a resource behind the firewall. Traffic to the specified resource will go through the VPN tunnel and therefore will be protected by the firewall’s security policies. Note: The device does not validate that the IP/netmask combination that you enter here matches up with your security policies.	Enter an IP address and netmask and click Add.
Remote Exceptions IP	IP address and netmask of exceptions to the remote protected resources list.	Enter an IP address and netmask and click Add.
Users
Users	List of users that can use this client configuration. Note: The server does not validate the names that you enter here, but the names must be the names that the users use to log onto the device when downloading the client.	Enter a user name and click Add.