Configuring Global Custom Application Settings

To configure global application settings in the J-Web user interface:

1. Click Configure>Security>Policy Elements>Applications.
2. Select the Custom-Applications tab.
3. Select one of the following options:
   • Add–To create a new application, click Add. The Add an Application dialog box appears.
   • Edit–To edit an existing configuration, select the application that you want to change and click Edit. The Edit an Application dialog box appears.
   • Delete–To delete an existing configuration, select it and click Delete. (If you select this option, you can skip the remaining steps in this section.)
4. Select the Global tab.
5. In the Application name field, specify a name for the custom application.
6. In the Application-protocol field, specify the application protocol. For a complete list of options, see Table 55.
7. In the Match IP protocol field, specify the network protocol. For a complete list of options, see Table 56.
8. In the Destination Port field, specify the destination port identifier. You can use a numeric value or one of the text synonyms listed in Table 57.
9. In the Source Port field, specify the source port identifier. You can use a numeric value or one of the text synonyms listed in Table 57.
10. In the Inactivity-timeout field, specify the length of time (in seconds) that the application is inactive before it times out.
11. In the RPC-program-number field, specify the remote procedure call (RPC) value. Valid values range from 0 to 65535.
12. In the Match ICMP message code field, specify the Internet Control Message Protocol (ICMP) code value, such as host-unreachable or host-unreachable-for-tos.
13. In the Match ICMP message type field, specify the ICMP packet type value, such as echo or echo-reply.
14. In the UUID field, specify a universal unique identifier (UUID). A UUID is a 128-bit unique number generated from a hardware address, a timestamp, and seed values.
15. In the Application-Set field, select the application set to which this application should belong.
16. Select one of the following options:
    • OK–To apply the configuration and return to the main Configuration page, click OK.
    • Cancel–To cancel your entries and return to the main page, click Cancel.