Static NAT Configuration Page Options
- Select Configure >NAT>Static NAT.
The Static NAT configuration page appears. Table 30 explains the contents of this page.
- Click one:
- Add—Adds a new or duplicate static NAT configuration. Enter information as specified in Table 31.
- Edit—Edits the selected static NAT configuration.
- Delete—Deletes the selected static NAT configuration.
- Click one:
- OK—Saves the configuration and returns to the main configuration page.
- Cancel—Cancels your entries and returns to the main configuration page.
Table 30: Static NAT Configuration Page
Field | Function |
|---|---|
| Static NAT Rule Set | |
From | Displays the sort option by routing instance/zone/interface from which the packet flows. |
To | Displays the sort option by routing instance/zone/interface to which the packet flows. |
Filter | Displays the option to filter a static NAT ruleset. |
Name | Displays the name of the static rule. |
From | Displays the name of the routing instance/zone/interface from which the packet flows. |
Rule | Displays the name of the routing instance/zone/interface to which the packet flows. |
| Rules in Selected Rule-Set | |
Rule Name | Displays the name of the rule. |
Match Destination | Displays the match destination address. |
Action | Displays the actions of the rules in the selected ruleset. |
Table 31: Add Static NAT Configuration Details
| Field | Function | Action |
|---|---|---|
| Add Rule Set | ||
Rule Set Name | Specifies the name of the ruleset. | Enter the name of the ruleset. |
| From | Specifies the options available. The options available are:
| Select an option. |
Available | Specifies the available routing instance, zones, and interfaces. | Select an option. |
Selected | Displays the selected routing instance, zones, and interfaces. | – |
| Rules | ||
| Add Rules | ||
Rule Name | Specifies the name of the rule. | Enter the rule name. |
| Match | ||
| Source Address | ||
Available | Displays the available source address. | – |
Selected | Displays the selected source address. | – |
Destination Address | Specifies the match destination address. | Enter the match destination address. |
Port | Specifies the port of the match destination address. | Enter the port of the match destination address. |
| Action | ||
No Destination NAT | Specifies that no destination NAT is required. | Select the option. |
Do Destination NAT with Pool | Specifies that no destination NAT is required. | Select the option. |
| Then | ||
Static Preface | Specifies the static preface. | Enter the static preface address. |
Routing Instance | Specifies the routing instance available. | Select the routing instance available. |
| Rules in Selected Rule-Set | ||
Rule Name | Specifies the rule name. | Enter the rule name. |
| Match | ||
Destination Address | Specifies the match destination address. | Enter the match destination address. |
| Then | ||
Static Preface | Specifies the static preface. | Enter the static preface address. |
Routing Instance | Specifies the routing instance available. | Select the routing instance available. |