Dial Plan

This section contains the following topics:

Configuring a Dial Plan (J-Web Procedure)

To configure a dial plan using the J-Web interface:

  1. Select Configure>Convergence Services>Dial Plan.

    The Dialplan configuration page appears. Table 113 explains the contents of this page.

  2. Click one:
    • Add — Adds a new dial plan configuration. Enter information as specified in Table 114.
    • Edit—Edits the selected dial plan configuration.
    • Delete—Deletes the selected dial plan configuration.
  3. Click one:
    • OK—Saves the configuration and returns to the main configuration page.
    • Cancel—Cancels your entries and returns to the main configuration page.
    • Commit—Applies the configuration and other pending changes (if any).

Table 113: Dial Plan Configuration Page

Field

Function

Dialplan name

Displays the dial plan name.

Preferences

Displays the preferences selected.

Digit Transformation

Displays the digital transform selected.

Table 114: Add Dial Plan Configuration Details

Field

Function

Action

Dialplan name

Specifies the dial plan name.

Enter the name of the dial plan.

Route pattern name

Specifies the route pattern name.

Enter the name of the route pattern.

Add>New Route Pattern Configuration

Route pattern

Specifies the route of the call and offers multiple paths if multiple trunks are configured for the route pattern.

Enter the route pattern.

Call type

Specifies the type of call. Call types available are:

  • Inter-branch-call
  • International call
  • Local-call
  • Long-distance-call

Select one of the options.

Trunk Group Information

Preference

Specifies the call routing option.

Enter the preference. The preference is 0 by default.

Digit manipulation list

The options available are:

  • dgttrm
  • dgt1
  • dgt2
  • dgt7

Select one of the options.

Available trunk groups

Displays the available trunk group.

Trunk group

Displays the group of trunks to be used to route calls.

Preference

Displays preferences of the selected trunk group.

Digit transform

Displays the digital transform of the selected trunk group.

Configuring Digital Manipulation (J-Web Procedure)

To configure digital manipulation using the J-Web interface:

  1. Select Configure>Convergence Services>Dial Plan>Manipulation.

    The digital manipulation configuration page appears. Table 115 explains the contents of this page.

  2. Click one:
    • Add — Adds a new digital manipulation configuration. Enter information as specified in Table 116.
    • Edit — Edits the selected digital manipulation configuration. Enter information as specified in Table 116.
    • Delete — Deletes the selected digital manipulation configuration.
  3. Click one:
    • OK — Saves the configuration and returns to the main configuration page.
    • Cancel — Cancels your entries and returns to the main configuration page.
    • Commit — Applies the configuration and other pending changes (if any).

Table 115: Digital Manipulation Configuration page

Field

Function

Digit transform name

Displays the digit transformation name.

Regular expression

Displays the regular expression.

Table 116: Add Digital Manipulation Configuration Details

Field

Function

Action

Digit transformation name

Specifies the name of the digital manipulation configuration to be used by the dial plan for routing calls.

Enter the digit transform name.

Regular expression

Specifies the digit to be masked while routing calls.

Enter the regular expression.