Station

This section contains the following topics:

Configuring Stations (J-Web Procedure)

To configure stations using the J-Web interface:

  1. Select Configure>Convergence Services>Station.

    The Station configuration page appears. Table 101 explains the contents of this page.

  2. Click one:
    • Add— Adds a new station configuration. Enter information as specified inTable 102.
    • Edit— Edits a selected station configuration. Enter information as specified inTable 102.
    • Delete— Deletes the selected station configuration.
  3. Click one:
    • OK— Saves the configuration and returns to the main configuration page.
    • Cancel—Cancels your entries and returns to the main configuration page.
    • Commit— Applies the configuration and other pending changes (if any).

Table 101: Station Configuration page

Field

Function

Station name

Displays the station name.

Extension

Displays the extension name.

Template name

Displays the station template name.

Type

Displays the station type (Analog or SIP).

Class of restriction

Specifies the types of calls that can be made from the station; for example, local calls and long-distance calls. By default, intrabranch and emergency calls are always allowed.

TDM interface

Displays the time-division multiplexing interface.

Table 102: Add Station Configuration Details

Field

Function

Action

Name

Specifies the station name.

Enter the name of the station.

Extension

Specifies the station extension name.

Enter the name of the station extension.

Class of restriction

Defines the types of calls that can be made from the station; for example, local calls and long-distance calls.

Enter the class of restriction. By default, intrabranch and emergency calls are always allowed.

Caller iD

Specifies the caller ID information to be displayed to called parties.

Enter the caller ID details.

Direct inward dialing

Specifies the DID number that external users can dial to reach the extension directly, bypassing an operator, and information about the line to be used for DID.

Enter the DID number.

Authentication identifier

Specifies the authentication ID to authenticate itself to the station.

Enter an authentication ID.

Authentication password

Specifies the authentication password to authenticate itself to the station.

Enter an authentication password.

Template name

Specifies the name of the station template

Enter the name of the station template.

Enable analog

Enables the analog station.

Enable Analog check box.

Tdm interface

Defines the time-division multiplexing interface.

Enter the TDM interface.

T1 slot number

Specifies the slot connection in the channel bank.

Configuring Station Template (J-Web Procedure)

To configure templates using J-Web:

  1. Select Configure>Convergence Services >Station Template.

    The Station template configuration page appears. Table 103 explains the contents of this page.

  2. Click one:
    • Add—Adds a new station template configuration. Enter information as specified in Table 104.
    • Edit—Edits a selected station template configuration.
    • Delete—Deletes the selected station template configuration.
  3. Click one:
    • OK—Saves the configuration and returns to the main configuration page.
    • Cancel—Cancels your entries and returns to the main configuration page.
    • Commit—Applies the configuration and other pending changes (if any).

Table 103: Station Template Configuration Page

Field

Function

Template name

Displays the station template name.

Type

Displays the type of station template.

Details of Station Template

Name

Displays the name of the station template selected.

Value

Displays the parameters selected in the station template.

Table 104: Add Station Template Configuration Details

Field

Function

Action

Template name

Specifies the station template name.

Enter the name of the station template.

Caller id transmit

Specifies the caller ID information configured for this parameter that is routed to all called parties.

Caller ID transmit is enabled by default. However, if it is disabled in a template that is applied to the station, caller ID information configured for the station is not transmitted.

Class of restriction

Specifies the types of calls that can be made from the station; for example, local calls and long-distance calls.

By default, intrabranch and emergency calls are always allowed.

Analog

Specifies the templates for analog stations.

Click for analog template.

SIP

Specifies the template for sip stations

Click for SIP template.

Analog

Voice activity detection

Specifies the number of packets sent when calls are idle.

Select the option ON or OFF

Comfort noise generation

Specifies the comfort noise generation transmitted instead of tones when a call is pending or placed on hold and when the parties are not speaking.

Select the option ON or OFF

SIP

Tone

Specifies the tone detection to enable calling features based on digit identification or tones generated by other analog devices or the PSTN.

The default tone is rfc-2833.

Codec

The following codec options are available:

  • G711-MU
  • G711-A
  • G729AB

Select one of the codec options.

Configuring Class of Restriction (J-Web Procedure)

To configure class of restriction using the J-Web interface:

  1. Select Configure>Convergence Services>Station.

    The Class of restriction configuration page appears. Table 105explains the contents of this page.

  2. Click one:
    • Add— Adds a new class of restriction configuration. Enter information as specified in Table 106.
    • Edit— Edits a selected class of restriction configuration.
    • Delete— Deletes the selected class of restriction configuration.
  3. Click one:
    • OK— Saves the configuration and returns to the main configuration page.
    • Cancel— Cancels your entries and returns to the main configuration page.
    • Commit—Applies the configuration and other pending changes (if any).

Table 105: Class of Restriction Configuration Page

Field

Function

Class of restriction name

Displays the class of restriction name.

Permission

Displays the permission available for the class of restrictions.

Table 106: Add Class of Restriction Configuration Details

Field FunctionAction

Class of restriction

Specifies the class of restriction name.

Enter the class of restriction name.

Policy name

Displays the permissions available for the policy.

Permission

Displays the permissions available for the class of restrictions.

Add

Adds the new policy configuration.

Click the Add button to create a new class of restriction.

New policy configuration

Policy name

Specifies the name of the policy.

Enter the name of the policy.

Permission

Permissions available for the policy

Enter the permission details.

Calltype

Specifies the type of call. Call types available are:

  • Inter-branch-call
  • International-call
  • Local-call
  • Long-distance-call

Select one of the options.