Configuring Full Antivirus UTM Policies (J-Web Procedure)

Next, you configure a UTM policy for antivirus to which you attach the antivirus profile you have configured.

  1. Select Configure>Security>Policy>UTM Policies.
  2. From the UTM policy configuration window, click Add to configure a UTM policy.

    This takes you to the policy configuration pop-up window.

  3. Select the Main tab in pop-up window.
  4. In the Policy name box, enter a unique name for the UTM policy you are creating.
  5. In the Session per client limit box, enter a session per client limit from 0 to 20000 for this UTM policy.
  6. For Session per client over limit, select one of the following: Log and permit, Block.

    This is the action the device takes when the session per client limit for this UTM policy is exceeded.

  7. Select the Anti-Virus profiles tab in the pop-up window.
  8. Select the appropriate profile you have configured from the list for the corresponding protocol listed.
  9. Click OK.
  10. If the policy is saved successfully, you receive a confirmation and you must click OK again. If the profile is not saved successfully, you can click Details in the pop-up window that appears to discover why.