Static NAT Configuration Page Options

To configure firewall static NAT:

  1. In the J-Web interface, select Configure >NAT>Static NAT.

    The Static NAT configuration page appears.

  2. Click one:
    • Add — Adds a new static rule set or a new rule in the selected rule set. Table 26 and Table 27 describe the available options for the new rule set and a new rules configuration page.
    • Edit — Edits a selected static rule set.
    • Delete — Deletes a selected static rule set in the selected rule set.
  3. Click one:
    • OK — Saves the configuration and returns to the main configuration page.
    • Cancel — Cancels your entries and returns to the main configuration page.

Table 26: Firewall Static NAT Configuration Page

FieldUse
Static NAT Rule Set Filter Options

From

Sort by routing instance/zone/interface from which the packet flows.

To

Sort by routing instance/zone/interface to which the packet flows.

Filter

Option to filter.

Static NAT Rule Set Tab Options

Name

Name of the static rule.

From

Name of the routing instance/zone/interface from which the packet flows.

Rule

Name of the routing instance/zone/interface to which the packet flows.

Rules in Selected Rule-Set Tab Options

Rule Name

Name of the rule.

Match Destination

Match destination address.

Match Destination Port

Match destination port address.

Table 27: Add Rule Set Configuration Details

FiledUseAction

Rule Set Name

Name of the rule set.

Enter the rule set name.

From

The options available are:

  • Router Instance
  • Zone
  • Interface

Select one of the options.

Available

Available routing instance, zones, and interfaces.

Select one of the options.

Selected

Selected routing instance, zones, and interfaces.

Add Rule

Rule Name

Name of the rule.

Enter the rule name.

Match

Destination Address

 
Then

Static Preface

  

Routing Instance