[Prev][Next][Report an Error]

Monitoring Source NAT Information

To view the source Network Address Translation (NAT) summary table and the details of the specified NAT source address pool information, select Monitor>NAT>Source NAT in the J-Web interface, or enter the following CLI commands:

Table 15 summarizes key output fields in the source NAT display.

Table 15: Summary of Key Source NAT Output Fields

Field

Values

Additional Information

Source NAT Summary Table

Pool Name

Name of the source pool.

 

Address Low

Starting IP address of one address range in the source pool.

 

Address High

Ending IP address of one address range in the source pool.

 

Interface

Name of the interface on which the source pool is defined.

 

PAT

Whether Port Address Translation (PAT) is enabled (Yes, or No).

 
Source NAT Pool Specific Summary: pool-name

Address

IP address in the source pool.

 

Interface

Name of the interface on which the source pool is defined.

 

Status

Status of the IP address:

  • Active—Denotes that the IP address is in use. This status applies only to source NAT without Port Address Translation (PAT).
  • Free—IP address is available for allocation.
 

Single Ports

Number of allocated single ports.

 

Twin Ports

Number of allocated twin ports.

 

PAT

Whether PAT is enabled (Yes or No).

 

[Prev][Next][Report an Error]