To view information about routes in a routing table or for information about OSPF, BGP, or RIP, select Monitor>Routing in the J-Web interface.
The routing information includes information about the route's destination, protocol, state, and parameters. To view selective information, type or select information in one or more of the Narrow Search boxes, and click OK. (See Sample Task—Monitoring Route Information).
Table 96 shows a summary of the information displayed on Routing pages and the corresponding CLI show commands you can enter at the J-Web CLI terminal.
Table 96: Routing Information and Corresponding CLI show Commands
Information Displayed |
Corresponding CLI Command |
---|---|
Route Information | |
A high-level summary of the routes in the routing table. |
show route terse |
Detailed information about the active entries in the routing tables. |
show route detail |
BGP Information | |
Summary about Border Gateway Protocol (BGP). |
show bgp summary |
BGP peers. |
show bgp neighbor |
OSPF Information | |
Information about Open Shortest Path First (OSPF) neighbors. |
show ospf neighbors |
OSPF interfaces. |
show ospf interfaces |
OSPF statistics. |
show ospf statistics |
RIP Information | |
Routing Information Protocol (RIP) statistics about messages sent and received on an interface, as well as information received from advertisements from other routing platforms. |
show rip statistics |
RIP neighbors. |
show rip neighbors |