Configuring 1-Port GE SFP Mini-PIM Interface Settings

Allows you to edits the 1-Port GE SFP Mini-PIM physical interface settings.

Select Edit on the task bar and update the following fields:

Description

Specifies a description for the 1-Port GE SFP Mini-PIM.

Enter a description updated for the Mini-PIM.

Speed (Mbps/Gbps)

Specifies the link speed.

Select the link speed from 10Mbps, 100Mbps, or 1Gbps.

MTU (Bytes)

Specifies the maximum transmission unit size for the Mini-PIM.

Enter an integer value from 256 through 9010 bytes.

Link Mode

Specifies the link mode.

Select the link mode from half-duplex or full-duplex

Enable Loopback

Enables loopback functionality.

Select the Enable Loopback check box.

Enable Auto Negotiation

Enables autonegotiation functionality to choose common link speed and link duplex mode.

Select the Enable Auto Negotiation check box.

Enable Per Unit Scheduler

Enables the per unit scheduler.

Select the Enable Per Unit Scheduler check box.

Enable VLAN Tagging

Enables VLAN Tagging.

Select the Enable VLAN Tagging check box.

Disables the 1-Port GE SFP Mini-PIM Interface.

Select the 1-Port GE SFP Mini-PIM Interface and then click Disable.

Adds the logical interface for the 1-Port GE SFP Mini-PIM.

Click Add on the task bar and then click Logical Interface and update the following fields:

Description

Describes the Mini-PIM’s logical interface.

Enter a description for the 1-Port GE SFP Mini-PIM logical Interface.

Unit

Specifies the configured unit.

Enter the unit number.

Zone

Specifies the security zone with which this interface is associated.

Select a zone from the list — trust, untrust, or junos-global

Family

Specifies the family protocol type to which the 1-Port GE SFP Mini-PIM logical Interface is added.

Select the IPv4 tab and then select Enable DHCP or Enable address configuration

OR

Select the IPv6 tab and then add the IPv6 address.

Allows you to edit the 1-Port GE SFP Mini-PIM logical interface.

Select the logical interface and then click Edit on the task bar and update the following fields:

Description

Describes the Mini-PIM logical interface.

Enter a description for the 1-Port GE SFP Mini-PIM Interface.

Unit

Specifies the configured unit.

Enter the unit number.

Zone

Specifies the security zone with which this interface is associated.

Select a zone from the list — trust, untrust, or junos-global

Family

Specifies the family protocol type to which the 1-Port GE SFP Mini-PIM logical Interface is added.

Select the IPv4 tab and then select Enable DHCP or Enable address configuration.

OR

Select the IPv6 tab and then add the IPv6 address.

Deletes the 1-Port GE SFP Mini-PIM logical interface.

Select the logical interface and then click Delete.