[Prev][Next][Report an Error]

Configuring Stations (J-Web Procedure)

To configure stations using the J-Web interface:

  1. Select Configure>Convergence Services>Station.

    The Station configuration page appears. Table 242 explains the contents of this page.

  2. Click one:
  3. Click one:

Table 242: Station Configuration page

Field

Function

Station name

Displays the station name.

Extension

Displays the extension name.

Template name

Displays the station template name.

Type

Displays the station type (Analog or SIP).

Class of restriction

Specifies the types of calls that can be made from the station; for example, local calls and long-distance calls. By default, intrabranch and emergency calls are always allowed.

TDM interface

Displays the time-division multiplexing interface.

Table 243: Add Station Configuration Details

Field

Function

Action

Name

Specifies the station name.

Enter the name of the station.

Extension

Specifies the station extension name.

Enter the name of the station extension.

Class of restriction

Defines the types of calls that can be made from the station; for example, local calls and long-distance calls.

Enter the class of restriction. By default, intrabranch and emergency calls are always allowed.

Caller iD

Specifies the caller ID information to be displayed to called parties.

Enter the caller ID details.

Direct inward dialing

Specifies the DID number that external users can dial to reach the extension directly, bypassing an operator, and information about the line to be used for DID.

Enter the DID number.

Authentication identifier

Specifies the authentication ID to authenticate itself to the station.

Enter an authentication ID.

Authentication password

Specifies the authentication password to authenticate itself to the station.

Enter an authentication password.

Template name

Specifies the name of the station template

Enter the name of the station template.

Enable analog

Enables the analog station.

Enable Analog check box.

Tdm interface

Defines the time-division multiplexing interface.

Enter the TDM interface.

T1 slot number

Specifies the slot connection in the channel bank.


[Prev][Next][Report an Error]