[Next][Report an Error]

Source NAT Configuration Page Options

To configure Source NAT:

  1. In the J-Web interface, select Configure >NAT>Source NAT.

    The Source NAT configuration page appears.

  2. Click one:
  3. Click one:

Table 119: Firewall Source NAT Configuration Page

Field Function
Source Rule Set Filter Options

From

Sort source NAT by routing instance/interface/zones from which the packets flow from.

To

Sort source NAT by routing instance/interface/zones to which the packets flow to.

Filter

Option to filter.

Source Rule Set tab

Name

Name of the source rule set.

From

NAT type selected.

To

Source NAT type selected.

Rule

Rule type selected.

Rules in Selected Rule-set

Rule Name

Name of the rule.

Match Source

Match source entered.

Match Destination

Match destination entered.

Match Destination Port

Match destination port entered.

Action

Action selected.

Persistent

Persistent NAT address in the source NAT pool

Source NAT Pool

Name

Name of the source NAT pool.

Address

IP address in the source pool.

Port

Specifies the action of the rule.

Table 120: Add Rule Set and Source NAT Pool Configuration Details

Filed Function Action

Rule-set Name

Name of the rule set.

Enter the rule set name.

 
From/To

The options available are:

  • Routing Instance
  • Zone
  • Interface

Select one of the options.

Add Rule

Rule Name

Name of the rule.

Enter the rule name.

Match

Delete

Option to delete the match addresses.

Delete the required match address.

Destination Port

The options available are:

  • Any
  • Port
  • Port Range

Select one of the options.

Action

The options available are:

  • No source NAT
  • Do source NAT with Egress Interface
  • Do source NAT with pool

Select one of the options.


[Next][Report an Error]