Configuring a Security Package Update

Download

Downloads the existing signature database.

Click Download on the task bar.

URL

Specifies the predefined default URL used by the device to download the signature database.

Version

Specifies the version number of the security package from the portal.

Select the version from the list.

Full Package

Enables the device to download the latest security package with the full set of attack signature tables from the portal.

Select the check box.

Install

Installs the existing signature database.

Click Install on the task bar.

Do not set to active after installed

Specifies to activate the installed security package.

Select the check box.

Download Status

Shows the security package download status in the message box.

Select Download Status from the Check Status list.

Install Status

Shows the security package install status in the message box.

Select Install Status from the Check Status list.

Download Setting

Sets the parameters of automatic download.

Click Download Setting.

URL Setting

Specifies the predefined default URL used by the device to download the signature database.

Click URL Setting and type a URL with the following format as per the previous:http://xmlexport.secteam.juniper.net

Note: The URL configured in the URL Setting window is displayed by default in the Download window.

Auto Download Setting

Interval

Specifies the time intervals for the automatic download.

Enter an integer.

Start Time

Specifies to install the latest policy templates from the portal.

Enter a time value in MM-DD.hh:mm format.

Download Time-Out

Specifies the time at which the automatic download expires.

Enter an integer.