Configuring the 3G Wireless Modem Interface

The physical interface for the 3G wireless modem, cl-0/0/8, is automatically created when a 3G wireless modem is installed in the device. You can use J-Web Quick Configuration to configure the 3G wireless interface and activate a CDMA EV-DO 3G wireless modem card.

Table 142: 3G Wireless Interface Quick Configuration Summary

Field	Function	Your Action
Configuring 3G Wireless Interfaces
Description	(Optional) Adds supplemental information about the 3G wireless physical interface on the device.	Type a text description of the physical 3G wireless interface in the box to clearly identify the interface when viewing displays.
Modem Options: Init String	(Optional) Specifies modem operation.	Type a string that begins with AT and includes Hayes modem commands.
Dialer Pool Options
Dialer Pools	Displays the list of configured dialer pools on the device.	To add a dialer pool to the interface, click Add. To edit a dialer pool, select the name from the list. You can change the priority, but not the name. To delete a dialer pool, select the check box and click Delete.
Dialer Pool Name (required)	Specifies the group of physical interfaces to be used by the dialer interface.	Type the dialer pool name—for example, 1.
Priority	Specifies the priority of this interface within the dialer pool. Interfaces with a higher priority are the first to interact with the dialer interface.	Type a priority value from 0 (lowest) to 255 (highest). The default is 0. Click OK to return to the Quick Configuration Interfaces page.
Card Activation Options
Card Activation	Enables the CDMA wireless modem card to connect to the service provider’s cellular network.	Select the type of card activation: IOTA—Internet-based over the air provisioning. Manual Activation—Requires manual entry of the required information. OTASP—Over the air service provisioning. Click Activate. If you selected Manual Activation or OTASP, you are prompted to enter information required for card activation. (No additional information is needed for IOTA card activation.) Click OK.
OTASP Activation Parameters
Dial String	Number that the modem uses to contact the service provider’s network.	Enter the dial number supplied by the service provider.
Manual Activation Parameters
International Mobile Station Identity	Mobile subscriber information	Enter the number supplied by the service provider.
Mobile Directory Number	10-digit user phone number	Enter the number supplied by the service provider.
Master Subsidy Lock	Activation code	Enter the code supplied by the service provider.
Network identification	Number between 0 and 65535	Enter the NID number displayed with the CLI show modem wireless interface cl-0/0/8 network command.
System identification	Number between 0 and 32767	Enter the SID number displayed with the CLI show modem wireless interface cl-0/0/8 network command.
Simple IP password	User name	Enter the user name supplied by the service provider.
Simple IP user ID	Password	Enter the password supplied by the service provider.

Configuring the 3G Wireless Modem Interface—Quick Configuration