[Prev][Next][Report an Error]

Monitoring Static NAT Information

To view static Network Address Translation table information, select Monitor>NAT>Static NAT in the J-Web interface, or enter the following CLI command:

Table 9 summarizes key output fields in the static NAT display.

Table 9: Summary of Key Static NAT Output Fields



Additional Information

Rule Filter Option

Rule-Set Name

Filter to sort rules by name.


Total Rules

Number of rules configured.

Rule Tab Option


Rule ID number.





Name of the rule.


Rule set Name

Name of the rule set.



Name of the routing instance/interface/zone from which the packet comes


Destination Address

Destination IP address and subnet mask.


Host Address

Host IP address and subnet mask mapped to the destination IP address and subnet mask.



Subnet IP address.


Host Routing Instance

Name of the routing instance from which the packet comes.


Translation Hits

Number of times a translation in the translation table is used for a static NAT rule.


[Prev][Next][Report an Error]