Monitoring Source NAT Information

To view the source Network Address Translation (NAT) summary table and the details of the specified NAT source address pool information, select Monitor>NAT>Source NAT in the J-Web interface, or enter the following CLI commands:

Table 7: Summary of Key Source NAT Output Fields

Field	Values	Additional Information
Source NAT Summary Table
Pool Name	Name of the source pool.
Address Low	Starting IP address of one address range in the source pool.
Address High	Ending IP address of one address range in the source pool.
Interface	Name of the interface on which the source pool is defined.
PAT	Whether Port Address Translation (PAT) is enabled (Yes, or No).
Source NAT Pool Specific Summary: pool-name
Address	IP address in the source pool.
Interface	Name of the interface on which the source pool is defined.
Status	Status of the IP address: Active—Denotes that the IP address is in use. This status applies only to source NAT without Port Address Translation (PAT). Free—IP address is available for allocation.
Single Ports	Number of allocated single ports.
Twin Ports	Number of allocated twin ports.
PAT	Whether PAT is enabled (Yes or No).