 |
Copyright © 2010, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
To view information about each session of the specified application type, select Monitor>Security>Flow Session Statistics in the J-Web interface. Then select application from the Session Filter list and click Show. Alternatively, enter the following CLI command:
show security flow session application application-name
Table 16 summarizes key output fields in the flow session application display.
Table 16: Summary of Key Flow Application Session Information Output Fields
|
Field |
Values |
Additional Information |
|---|---|---|
| Flow Session Statistics: session filter—application | ||
|
Session ID |
Number that identifies the session. Use this ID to get more information about the session. |
|
|
Policy name |
Policy that permitted the traffic. |
|
|
Timeout |
Idle timeout after which the session expires. |
|
|
In |
Incoming flow (source and destination IP addresses, application protocol, and interface). |
|
|
Out |
Reverse flow (source and destination IP addresses, application protocol, and interface). |
|
|
Copyright © 2010, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |