 |
Copyright © 2010, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |
To view information about all currently active security sessions on the device, select Monitor>Security>Flow Session Statistics in the J-Web interface. Then select all from the Session Filter list and click Show. To view information about the incoming and outgoing source and destination addresses and the protocol and interface for a specific session, select the session ID on the Flow Session Statistics page.
Alternatively, enter the following CLI command:
show security flow session
Table 15 summarizes key output fields in the flow all session display.
Table 15: Summary of Key Flow All Session Information Output Fields
|
Field |
Values |
Additional Information |
|---|---|---|
| Flow Session Statistics: session filter—all | ||
|
Session ID |
Number that identifies the session. Use this ID to get more information about the session. |
|
|
Policy name |
Policy that permitted the traffic. |
|
|
Timeout |
Idle timeout after which the session expires. |
|
| Flow Session Statistics: Session ID | ||
|
In |
Incoming flow (source and destination IP addresses, application protocol, and interface). |
|
|
Out |
Reverse flow (source and destination IP addresses, application protocol, and interface). |
|
|
Copyright © 2010, Juniper Networks, Inc. All rights reserved. Trademark Notice. | |