Monitoring Destination NAT Information

To view the source Network Address Translation (NAT) summary table and the details of the specified NAT source address pool information, select Monitor>NAT>Source NAT in the J-Web interface, or enter the following CLI command:

Table 8: Summary of Key Source NAT Output Fields

Field	Values	Additional Information
Source NAT Rules Filter Options
Rule-Set Name	Name of the rule set.
Total Rules	Total rules available.
Source NAT Rules Tab Options
ID	ID of the rule.
Name	Name of the rule .
Ruleset Name	Name of the ruleset.
From	Name of the routing instance/zone/interface from which the packet flows.
To	Name of the routing instance/zone/interface to which the packet flows .
Source Address Range	Source IP address range in the source pool.
Destination Address Range	Destination IP address range in the source pool.
Action	Action configured for the destination NAT rules.
Destination Port	Destination port in the destination pool.
Translation Hits	Number of times the router translates two components in the IP header of the incoming packet.
Pools Filter Option
Pool Name	Drop-down box for selecting the pool name to be displayed.
Total Pools	Total pools added.
Pools Tab Option
ID	ID of the Pool.
Name	Name of the destination pool.
Address Range	IP address range in the destination pool.
Port	Destination port number in the pool.
Routing Instance	Name of the routing instance.
Total Addresses	Total IP address, IP address set, or address book entry.
Translation Hits	Number of times a translation in the translation table is used for destination NAT.
Address High	Ending IP address of one address range in the source pool.
Top 10 Translation Hits	Displays the graph of top 10 translation hits.