MPLS

To view information about MPLS label-switched paths (LSPs) and virtual private networks (VPNs), select Monitor>MPLS.

Table 86 shows a summary of the information displayed on MPLS pages and the corresponding CLI show commands you can enter at the J-Web CLI terminal.

Table 86: MPLS Information and Corresponding CLI show Commands

Information Displayed	Corresponding CLI Command
Interfaces
Interfaces on which MPLS is enabled, plus the operational state and any administrative groups applied to an interface.	show mpls interface
LSP Information
LSP sessions currently active on the Services Router, including inbound (ingress) and outbound (egress) addresses, LSP state, and LSP name.	show mpls lsp
LSP Statistics
Statistics for LSP sessions currently active on the Services Router, including the total number of packets and bytes forwarded through an LSP.	show mpls lsp statistics
RSVP Sessions
RSVP-signaled LSP sessions currently active on the Services Router, including inbound (ingress) and outbound (egress) addresses, LSP state, and LSP name.	show rsvp session
RSVP Interfaces
Interfaces on which RSVP is enabled, including the interface name, total bandwidth through the interface, and total current reserved and reservable (available) bandwidth on the interface.	show rsvp interface