[Prev][Report an Error]

Configuring Firewall Authentication (J-Web Procedure)

To configure banners for firewall authentication using the J-Web configuration editor, follow these steps:

  1. In the J-Web user interface, select Configure>Authentication. The Firewall Auth configuration page appears.
  2. Enter information for Firewall Authentication banners as described in Table 201.
  3. Click one of the following buttons:

Table 201: Firewall Authentication

Field

Function

Action

Pass-through Settings

Default Profile

Policies use this profile to authenticate users. The profile can contain authentication servers or users.

Select the authentication profile to use if a profile is not already specified in a policy.

Note: JWeb does not support access profiles; access profiles can only be configured using the CLI. If an access profile is not configured, you cannot assign banners.

HTTP Banner

Customize banner text for users logging in using HTTP:

Login: This message displays the login prompt.

Fail: This message displays failed login.

Success: This message displays a successful login.

Enter a string of up to 250 characters in length.

FTP Banner

Customize banner text for users logging in using FTP:

Login: This message displays the login prompt.

Fail: This message displays failed login.

Success: This message displays a successful login.

Enter a string up to 250 characters in length.

Telnet Banner

Customize banner text for users logging in using Telnet:

Login: This message displays the login prompt.

Fail: This message displays failed login.

Success: This message displays a successful login.

Enter a string up to 250 characters in length.

Web-auth Settings

Default Profile

Policies use this profile to authenticate users. The profile can contain authentication servers or users.

 

Select the authentication profile to use if a profile is not already specified in a policy.

Banner (Success)

Customize banner text for users logging in through the Web browser.

Success: This message displays a successful login.

Enter a string up to 250 characters in length.


[Prev][Report an Error]