[Next][Report an Error]

Chassis Cluster Quick Setup Configuration Page Options

To configure Chassis Cluster Quick Setup:

  1. In the J-Web interface, select Configure>Chassis Cluster>Setup. The chassis cluster quick setup configuration page is displayed.
  2. Enter the required configuration values for this page as shown in Table 222.
  3. Click one:

Table 222: Chassis Cluster Quick Setup Configuration Page

Field Function Action

Cluster ID

Specifies the number by which a cluster is identified.

Enter a number from 0 to 15.

Node

Node ID

Specifies the number by which a node is identified.

Enter a number from 0 to1.

Node Management IP Address (fxp0.0)

Specifies the Management IP address of that Node.

 
Control Link    

Fpc

Specifies the Fpc control link.

Select the fpc number listed in the drop-down.

Port

Specifies the port to configured for the control link

Enter a number from 0 to 2.


[Next][Report an Error]