[Prev][Next][Report an Error]

Phase 2 of IKE Tunnel Negotiation

After the participants have established a secure and authenticated channel, they proceed through Phase 2, in which they negotiate the SAs to secure the data to be transmitted through the IPsec tunnel.

Similar to the process for Phase 1, the participants exchange proposals to determine which security parameters to employ in the SA. A Phase 2 proposal also includes a security protocol—either Encapsulating Security Payload (ESP) or Authentication Header (AH)—and selected encryption and authentication algorithms. The proposal can also specify a Diffie-Hellman group, if Perfect Forward Secrecy (PFS) is desired.

Regardless of the mode used in Phase 1, Phase 2 always operates in quick mode and involves the exchange of three messages.

Juniper Networks devices support up to four proposals for Phase 2 negotiations, allowing you to define how restrictive a range of tunnel parameters you will accept. The predefined Phase 2 proposals that JUNOS Software provides are as follows:

You can also define custom Phase 2 proposals.

Note: If you are using the dynamic VPN feature, note that you must create a custom Phase 2 proposal. Predefined Phase 2 proposals are not available at this time.

[Prev][Next][Report an Error]