Monitoring RIP Routing Information

To view RIP routing information, select Monitor>Routing>RIP Information, or enter the following CLI commands:

Table 49: Summary of Key RIP Routing Output Fields

Field	Values	Additional Information
RIP Statistics
Rip info	Information about RIP on the specified interface, including UDP port number, hold-down interval (during which routes are neither advertised nor updated), and timeout interval.
Logical interface	Name of the logical interface on which RIP is configured.
Routes learned	Number of RIP routes learned on the logical interface.
Routes advertised	Number of RIP routes advertised on the logical interface.
RIP Neighbors
Neighbor	Name of the RIP neighbor.	This value is the name of the interface on which RIP is enabled. The name is set in the CLI configuration editor, with the neighbor neighbor-name statement at the [edit protocols rip group group-name] level of the configuration hierarchy.
State	State of the RIP connection: Up or Dn (Down).
Source Address	Local source address.	This value is the configured address of the interface on which RIP is enabled.
Destination Address	Destination address.	This value is the configured address of the immediate RIP adjacency.
In Met	Value of the incoming metric configured for the RIP neighbor.