Monitoring Static NAT Information

To view static Network Address Translation table information, select Monitor>NAT>Static NAT in the J-Web interface, or enter the following CLI command:

Table 8: Summary of Key Static NAT Output Fields

Field	Values	Additional Information
Rule Filter Option
Rule-Set Name	Filter to sort rules by name.
Total Rules	Number of rules configured.
Rule Tab Option
ID	Rule ID number.
Position
Name	Name of the rule.
Rule set Name	Name of the rule set.
From	Name of the routing instance/interface/zone from which the packet comes
Destination Address	Destination IP address and subnet mask.
Host Address	Host IP address and subnet mask mapped to the destination IP address and subnet mask.
Netmask	Subnet IP address.
Host Routing Instance	Name of the routing instance from which the packet comes.
Translation Hits	Number of times a translation in the translation table is used for a static NAT rule.