[Prev][Next][Report an Error]

Configuring Custom Application Terms

To configure individual application terms in the J-Web user interface:

  1. Click Configure>Security>Policy Elements>Applications.
  2. Select the Custom-Applications tab.
  3. Select one of the following options:
  4. Select the Terms tab.
  5. Select one of the following options:
  6. In the Term Name field, enter a name for the application term.
  7. In the ALG field, specify the application protocol. For a complete list of options, see Table 146.
  8. In the Match IP protocol field, specify the network protocol. For a complete list of options, see Table 147.
  9. In the Destination Port field, specify the destination port identifier. You can use a numeric value or one of the text synonyms listed in Table 148.
  10. In the Source Port field, specify the source port identifier. You can use a numeric value or one of the text synonyms listed in Table 148.
  11. In the Inactivity-timeout field, specify the length of time (in seconds) that the application is inactive before it times out. For more information about timeouts, see .
  12. In the RPC-program-number field, specify the remote procedure call (RPC) value. Valid values range from 0 to 65535.
  13. In the Match ICMP message code field, specify the Internet Control Message Protocol (ICMP) code value, such as host-unreachable or host-unreachable-for-tos.
  14. In the Match ICMP message type field, specify the ICMP packet type value, such as echo or echo-reply.
  15. In the UUID field, specify a universal unique identifier (UUID). A UUID is a 128-bit unique number generated from a hardware address, a timestamp, and seed values.
  16. Select one of the following options:
  17. Select one of the following options:

[Prev][Next][Report an Error]