[Prev][Next][Report an Error]

Defining Scheduler Maps

After defining schedulers you associate them with forwarding classes by means of scheduler maps. For more information on scheduler maps, see the JUNOS Software Interfaces and Routing Configuration Guide for Security Devices.

To configure scheduler maps using the J-Web configuration editor:

  1. Select Configure>Class of Service>Scheduler Maps.

    The Configure Scheduler Maps summary page appears.

  2. Fill in the options as shown in Table 138.
  3. Click one of the following buttons:

Table 138: Scheduler Maps Configuration Options

Field

Function

Action

Configure Scheduler Maps

Scheduler map name

Displays the names of defined scheduler maps. Scheduler maps link schedulers to forwarding classes.

None

Schedulers

For each map, displays the schedulers assigned to it.

None

Forwarding Class

For each map, displays the forwarding classes assigned to it.

None

Details of Scheduler

Name

Displays the scheduler assigned to the selected scheduler map

None

Value

Displays the CoS values.

None

Add

Opens a page that allows you to add a scheduler map.

To add a scheduler map, click Add.

Edit

Opens a page that allows you to edit a selected scheduler map.

To edit an existing scheduler map, select the scheduler map in the summary page and click Edit.

Delete

Removes selected scheduler maps.

To remove an existing scheduler map, select the scheduler map and click Delete.

Add Scheduler Map/Edit Scheduler Map

Scheduler map name

Specifies the name for a scheduler map.

To name a map, type the name—for example, be-scheduler-map.

Scheduler mapping

Allows you to associate a preconfigured scheduler with a forwarding class.

Once applied to an interface, the scheduler maps affect the hardware queues, packet schedulers, and RED drop profiles.

To associate a scheduler with a forwarding class, locate the forwarding class and select the scheduler in the box next to it.


[Prev][Next][Report an Error]