[Next][Report an Error]

Chassis Cluster Setup Page Options

To configure Chassis Cluster Quick Setup:

  1. In the J-Web interface, select Configure>Chassis Cluster>Setup. The chassis cluster quick setup configuration page is displayed.
  2. Enter the options available in the quick setup configuration page mentioned in Table 215.
  3. Click one:

Table 215: Chassis Cluster Quick Setup Configuration Page

Field Function Action

Cluster ID

Specifies the number by which a cluster is identified.

Enter a number from 0 to 1.

Node

Node ID

Displays the number by which a node is identified.

Enter a number from 1 to15.

Node Management IP Address (fxp0.0)

Need Input  
Control Link    

fpc

Need Input  

Port

Need Input  

[Next][Report an Error]