[Prev][Next][Report an Error]

Configuring a Policy Term (Required)

Each routing policy term is identified by a term name. The name can contain letters, numbers, and hyphens (-) and can be up to 255 characters long. To include spaces in the name, enclose the entire name in double quotation marks.

To configure a policy term:

  1. Navigate to the top of the configuration hierarchy in either the J-Web or CLI configuration editor.
  2. Perform the configuration tasks described in Table 113.
  3. If you are finished configuring the router, commit the configuration.
  4. To configure additional routing policy features, go on to one of the following procedures:

Table 113: Configuring a Policy Term


J-Web Configuration Editor

CLI Configuration Editor

Navigate to the Policy statement level in the configuration hierarchy.

  1. In the J-Web interface, select Configure>CLI Tools>Point and Click CLI.
  2. Next to Policy options, click Configure or Edit.
  3. Under Policy name, click policy1.

From the [edit] hierarchy level, enter

edit policy-options policy-statement policy1

Create and name a policy term—for example, term1.

  1. In the Term box, click Add new entry.
  2. In the Term name box, type term1.
  3. Click OK.

Create and name a policy term:

set term term1

[Prev][Next][Report an Error]