Monitoring IDP Status

To view Intrusion Detection and Prevention (IDP) table information, select Monitor>Security>IDP>Status in the J-Web interface, or enter the following CLI command:

Table 22: Summary of IDP Status Output Fields

Field	Values	Additional Information
IDP Status
Status of IDP	Displays the status of the current IDP policy.
Up Since	Displays the time from when the IDP policy first began running on the system.
Packets/Second	Displays the number of packets received and returned per second.
Peak	Displays the maximum number of packets received per second and the time when the maximum was reached.
Kbits/Second	Displays the aggregated throughput (kilobits per second) for the system.
Peak Kbits	Displays the maximum kilobits per second and the time when the maximum was reached.
Latency (Microseconds)	Displays the delay, in microseconds, for a packet to receive and return by a node .
Current Policy	Displays the name of the current installed IDP policy.
IDP Memory Statistics	Displays the status of all IDP data plane memory.
PIC Name	Displays the name of the PIC.
Total IDP Data Plane Memory (MB)	Displays the total memory space, in megabytes, allocated for the IDP data plane.
Used (MB)	Displays the used memory space, in megabytes, for the data plane.
Available (MB)	Displays the available memory space, in megabytes, for the data plane.