Adding, Editing, and Deleting Certificates on the Device

You can use the Certificates tab to upload SSL certificates to the device, edit existing certificates on the device, or delete certificates from the device. You can use the certificates to secure HTTPS and JUNOScript sessions. (For information about how to generate an SSL certificate to upload to the device, see Generating SSL Certificates.)

To add, edit, or delete a certificate:

1. In the J-Web user interface, select Configure>System Properties>Management Access.
2. Click Edit. The Edit Management Access dialog box appears.
3. Select the Certificates tab.
4. Choose one of the following options:
   • If you want to add a new certificate, click Add. The Add Certificate section is expanded.
   • If you want to edit the information for an existing certificate, select it and click Edit. The Edit Certificate section is expanded.
   • If you want to delete an existing certificate, select it and click Delete. (You can skip the remaining steps in this section.)
5. In the Certificate Name box, type a name—for example, new.
6. In the Certificate content box, paste the generated certificate and RSA private key.
7. Click Save.
8. Click OK to save the configuration or Cancel to clear it.

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.