Configuring the Media Gateway (J-Web Procedure)

To configure the media gateway using the J-Web interface:

Select Configure >Convergence Services >Media Gateway .

The Media gateway configuration page appears. Table 203 explains the contents of this page.

Click one of the following in the list pane:

Add — Adds a new media gateway configuration. Click one:
- New— Adds a new media gateway configuration.
- Clone—Duplicates the existing media gateway configuration. Enter information as specified in Table 204
Edit—Modifies the selected media gateway configuration.
Delete—Deletes the selected media gateway configuration.

Click one:

Table 203: Media Gateway Configuration Page

Field	Function
Media gateway name	Displays the media gateway name.
Description	Displays the details of the media gateway name.
Details of the Media Gateway
Name	Displays the name of the selected media gateway.
Value	Displays the details of the selected media gateway.

Table 204: Add New Media Gateway Configuration Details

Field	Value	Action
Media gateway	Specifies the media gateway name.	Enter the name of the media gateway.
Transport	Specifies the transport used for the SIP protocol:UDP, TCP or TLS.	Enter the transport value. The default transport is UDP.
Port number	Specifies the number used for the communications endpoint for the SIP protocol.	Enter the port number. The default port is 5060.
Call Server	Specifies the peer call server name.	Enter the call server name.
Dialplan	Specifies the configuration for the routing of calls.	Enter the dial plan.
Zone	Specifies the service point for the services gateway.	Enter the zone.

Report an Error