Configuring Policies for UTM using J-Web Configuration

Configure a UTM policy for Antivirus, Antispam, Content Filtering, and Web Filtering to which you attach the specific UTM feature profile you have already configured. Configure a UTM policy as follows:

1. Select the Configure tab at the top of the page.
2. Select Security in the left pane to expand it.
3. Select Policy in the left pane to expand it.
4. Select UTM Policies in the left pane.
5. From the UTM policy configuration window in the right pane, click the Add button at the top of the screen to configure a UTM policy. This takes you to the policy configuration pop-up screen.
6. Select the Main tab in pop-up screen.
7. In the Policy Name box, enter a unique name for the UTM policy you are creating.
8. In the Session per client limit box, enter a session per client limit from 0 to 20000 for this UTM policy.
9. For Session per client over limit, select one of the following: Log and Permit, Block. This is the action the device takes when the session per client limit for this UTM policy is exceeded.
10. Select the appropriate tab for the UTM feature for which you are configuring a policy in the pop-up screen.
11. Next to <protocol> profile (for example HTTP profile for Web Filtering), select the profile you have configured from the list.
12. Click OK.
13. If the policy is saved successfully, you receive a confirmation and you must click OK again. If the profile is not saved successfully, you can click Details on a pop-up window to discover why.

Copyright © 2010, Juniper Networks, Inc. All rights reserved. Trademark Notice.