On the M7i, M10i, and M320 routing platforms you can use the chassis viewer feature to view images of the chassis and access information about each component similar to what you can obtain using the show chassis alarms and show chassis hardware commands.
To access the chassis viewer, click the Chassis Viewer icon in the upper right corner of any J-Web page for an M7i, M10i, or M320 routing platform. A separate window opens to display the image of the chassis and its component parts, including power supplies, individual PICs, and ports. The status of each port appears in red or green. Major or minor alarm indicators appear in red.
The chassis viewer is updated dynamically every 10 seconds.
If a PIC is not supported by the J-Web chassis viewer, an image of the PIC is not displayed. However, you can still right-click an interface and click on Monitor or Configure to go to the monitor or configuration J-Web page for that interface.
Note: The J-Web window might be behind the chassis viewer window.
For more information about the J-Web Monitor task, see Monitor Tasks.