[Prev][Next][Report an Error]

Upgrading Access Point Software (J-Web Configure)

You can use J-Web Configure to upgrade software on an access point.

In this procedure, the software to be loaded onto the access point is a tar file on a Windows PC. The file is first transferred from the PC to the SRX Series device, and then loaded onto the access point from the SRX Series device.

To upgrade access point software:

  1. Copy the tar file that contains the access point software onto the Windows PC that is running the J-Web interface.
  2. In the J-Web interface, select Configure>Wireless LAN>Firmware upgrade.

    The Firmware Upgrade page displays a list of access points configured on the SRX Series Services Gateway.

  3. Click Upgrade.
  4. Select the access point to be upgraded.
  5. Enter the name of the tar file to be uploaded to the access point or click Browse to navigate to the file.
  6. Click Upgrade.

[Prev][Next][Report an Error]