[Prev][Next][Report an Error]

Monitoring Flow Information for All Sessions

To view information about all currently active security sessions on the device, select Monitor>Security>Flow Session Statistics in the J-Web interface. Then select all from the Session Filter list and click Show. To view information about the incoming and outgoing source and destination addresses and the protocol and interface for a specific session, select the session ID on the Flow Session Statistics page.

Alternatively, enter the following CLI command:

show security flow session

Table 11 summarizes key output fields in the flow all session display.

Table 11: Summary of Key Flow All Session Information Output Fields

Field	Values	Additional Information
Flow Session Statistics: session filter—all
Session ID	Number that identifies the session. Use this ID to get more information about the session.
Policy name	Policy that permitted the traffic.
Timeout	Idle timeout after which the session expires.
Flow Session Statistics: Session ID
In	Incoming flow (source and destination IP addresses, application protocol, and interface).
Out	Reverse flow (source and destination IP addresses, application protocol, and interface).

[Prev][Next][Report an Error]