[Next][Report an Error]

Configuring Interfaces—Quick Configuration

You can use J-Web Quick Configuration to quickly configure most network interfaces, as shown in Figure 8.

Figure 8: Quick Configuration Interfaces Page

Quick Configuration Interfaces Page

To configure a network interface with Quick Configuration:

  1. Select Configure>Interfaces. For information about interface names, see the JUNOS Software Interfaces and Routing Configuration Guide.

    A list of the network interfaces available on the routing platform appears, as shown in Figure 8. The third column indicates whether the interface has been configured.

    Note: Channelized T1 and E1 interfaces are not displayed in the list of interfaces on the J-Web Quick Configuration Interfaces page. However, you can configure and view channelized T1/E1/ISDN PRI interfaces with the J-Web configuration editor. For details, see the JUNOS Software Interfaces and Routing Configuration Guide

  2. Configure properties for a network interface by selecting the interface name and following the instructions in one of the following topics.
[Next][Report an Error]

Copyright © 2009, Juniper Networks, Inc. All rights reserved. Trademark Notice.