Example: Configuring an Active/Passive Chassis Cluster Pair (J-Web)

1. Enable clustering. See Step 1 in Example: Configuring an Active/Passive Chassis Cluster Pair (CLI).
2. Configure the management interface. See Step 2 in Example: Configuring an Active/Passive Chassis Cluster Pair (CLI).
3. Configure the fabric interface. See Step 3 in Example: Configuring an Active/Passive Chassis Cluster Pair (CLI).
4. Configure the redundancy groups.
   • Select Configure>System Properties>Chassis Cluster.
   • Enter the following information, and then click Apply:
     • Redundant ether-Interface Count: 2
     • Heartbeat Interval: 1000
     • Heartbeat Threshold: 3
     • Nodes: 0
     • Group Number: 0
     • Priorities: 100
   • Enter the following information, and then click Apply:
     • Nodes: 0
     • Group Number: 1
     • Priorities: 1
   • Enter the following information, and then click Apply:
     • Nodes: 1
     • Group Number: 0
     • Priorities: 100
   • Enter the following information, and then click Apply:
     • Nodes: 1
     • Group Number: 1
     • Priorities: 1
     • Interface Monitor—Interface: fe-1/0/0
     • Interface Monitor—Weight: 255
     • Interface Monitor—Interface: fe-5/0/0
     • Interface Monitor—Weight: 255
     • Interface Monitor—Interface: ge-0/0/0
     • Interface Monitor—Weight: 255
     • Interface Monitor—Interface: ge-4/0/0
     • Interface Monitor—Weight: 255
5. Configure the redundant Ethernet interfaces.
   • Select Configure>System Properties>Chassis Cluster.
   • Select ge-0/0/0.
   • Enter reth1 in the Redundant Parent box.
   • Click Apply.
   • Select ge-4/0/0.
   • Enter reth1 in the Redundant Parent box.
   • Click Apply.
   • Select fe-1/0/0.
   • Enter reth0 in the Redundant Parent box.
   • Click Apply.
   • Select fe-5/0/0.
   • Enter reth0 in the Redundant Parent box.
   • Click Apply.
   • See Step 5 in Example: Configuring an Active/Passive Chassis Cluster Pair (CLI) for the last four configuration settings.
6. Configure the security zones. See Step 6 in Example: Configuring an Active/Passive Chassis Cluster Pair (CLI).
7. Configure the security policies. See Step 7 in Example: Configuring an Active/Passive Chassis Cluster Pair (CLI).
8. Click OK to check your configuration and save it as a candidate configuration, then click Commit Options>Commit.

Related Topics

• Junos OS Feature Support Reference for SRX Series and J Series Devices
• Understanding Active/Passive Chassis Cluster Deployment
• Example: Configuring an Active/Passive Chassis Cluster Pair (CLI)
• Understanding What Happens When Chassis Cluster Is Enabled
• Understanding Chassis Cluster Formation