Example: Configuring the Number of Redundant Ethernet Interfaces in a Chassis Cluster (CLI)

For the chassis cluster configuration, you specify the number of redundant Ethernet interfaces that the cluster contains and the information used to monitor the “health” of the cluster.

Before you begin, set the chassis cluster node ID and cluster ID using the instructions in Example: Setting the Chassis Cluster Node ID and Cluster ID (CLI)

You must configure the redundant Ethernet interfaces count for the cluster in order for the redundant Ethernet interfaces that you configure to be recognized.

Use the following command in configuration mode to define the number of redundant Ethernet interfaces for the cluster:

Related Topics

• Junos OS Feature Support Reference for SRX Series and J Series Devices
• Understanding What Happens When Chassis Cluster Is Enabled
• SRX Series Chassis Cluster Configuration Overview
• J Series Chassis Cluster Configuration Overview
• Example: Setting the Chassis Cluster Node ID and Cluster ID (CLI)
• Example: Configuring the Chassis Cluster Management Interface (CLI)
• Verifying a Chassis Cluster Configuration