Hide Navigation Pane
Show Navigation Pane
Feedback
Download
SHA1
Example: Configuring Chassis Cluster Control Ports (CLI)
On SRX5600 and SRX5800 devices, by default, all control ports are disabled. You need to configure the control ports that you will use on each device to set up the control link or, optionally, the dual control links in a chassis cluster.
Use the following commands to configure the control ports for use as the control link for the chassis cluster:
user@host# set chassis cluster control-ports
fpc4 port 0user@host# set chassis cluster control-ports
fpc10 port 0
Use the following commands to configure the control ports for use as dual control links for the chassis cluster.
user@host# set chassis cluster control-ports
fpc4 port 0user@host# set chassis cluster control-ports
fpc10 port 0user@host# set chassis cluster control-ports
fpc6 port 1user@host# set chassis cluster control-ports
fpc12 port 1
Related Topics
- Junos OS Feature Support Reference for SRX Series and J Series Devices
- Understanding Chassis Cluster Control Links
- Understanding Chassis Cluster Dual Control Links
- Connecting Dual Control Links for SRX Series Devices in a Chassis Cluster
- Understanding Chassis Cluster Control Link Heartbeats
- Understanding Chassis Cluster Control Link Failure and Recovery
- Understanding the Chassis Cluster Control Plane
