Configuring the DOCSIS Logical Interfaces (J-Web procedure)

To configure the logical interface of DOCSIS Mini-PIM using J-Web:

1. Select Interfaces>Configure.
2. Under Interface, select cm-4/0/0 and then click Add>Logical Interface. A pop-up window appears.
3. From the Zone list, select None.
4. To add a family protocol type to the Mini-PIM interfaces, select the following check boxes as applicable:
   • INET: Supports IP protocol traffic, including OSPF, BGP, and ICMP.
   • MPLS: Supports MPLS.
5. Click OK.

To edit the logical interfaces of the DOCSIS Mini-PIM using J-Web:

1. Under Interface, select the logical interface added to the DOCSIS Mini-PIM and then click Edit. A pop-up window appears.
2. From the Zone list, select None.
3. To add a family protocol type to the Mini-PIM interfaces, select the following check boxes as applicable:
   • INET: Supports IP protocol traffic including, Open Shortest Path First (OSPF), Border Gateway Protocol (BGP), and Internet Control Message Protocol (ICMP).
   • MPLS: Supports Multiprotocol Label Switching (MPLS).
4. Click OK.

Note: You cannot add or edit Interface Name, Description, and Unit for a logical interface.

To delete the logical interface of the DOCSIS Mini-PIM using J-Web:

1. Select Interfaces>Configure.
2. Under Interface, select cm-4/0/0.0 and then click Delete. A pop-up window appears.
3. Click Yes.