Configuring Routing Options on the VPLS PE Router

For each router involved in the VPLS, specify the router ID and autonomous system (AS) number. In this sample, PE1 and PE2 use the same AS number (100).

You can use either J-Web or the CLI configuration editor to configure VPLS on a PE router.

This topic covers:

• J-Web Configuration
• CLI Configuration
• Related Topics

J-Web Configuration

To configure the router ID on the VPLS PE router:

1. Select Configure>CLI Tools>Point and Click CLI.
2. Next to Routing options, click Edit.
3. In the Router ID box, type 10.255.7.168.

To configure the AS number on the VPLS PE router:

1. In the As number box, type 100.
2. Click OK.

CLI Configuration

To configure the router ID on the VPLS PE router:

To configure the AS number on the VPLS PE router:

Related Topics

• Configuring Routing Interfaces on the VPLS PE Router