Displaying DLSw Circuit State

Purpose

Display DLSw circuits currently established after configuration in Configuring Basic DLSw (Required).

Action

From the CLI, enter the show dlsw circuits command.

Local address       LSAP Remote address    DSAP Peer            Uptime
22:22:00:00:00:06 04      44:44:00:00:00:06  04      18.255.18.2   00:06:42

Meaning

The output shows a summary of DLSw circuits. Verify that the information is correct for your DLSw network.

• Local address—MAC address of the local DLSw peer
• LSAP—Number of the local service access point
• Remote address—MAC address of the remote DLSw peer
• DSAP—Number of the destination service access point
• Peer (or remote peer address)—IP address of the remote DLSw peer
• Uptime—How long the circuit has been established

Related Topics

For a complete description of show dlsw circuits output, see the JUNOS System Basics and Services Command Reference.