[ Contents] [ Prev] [ Next] [ Report an Error]

Before You Begin

Before installing and connecting a Services Router, read Safety Warnings Summary.

Then make sure you have the equipment listed in Table 1.

Table 1: Equipment Required for Services Router Installation

All Models	J2300 Model Only	All Other Models	Management Access
Electrostatic discharge (ESD) grounding strap (not provided) For rack or wall installation, a screwdriver appropriate for the screws or anchors (not provided) For AC power, an AC power cord with a plug appropriate for your geographical location (provided) For DC power, 14 AWG DC power cables with appropriate lugs (not provided) For grounding, 14 AWG grounding cable and lug for the router (not provided)	For desk installation, four rubber feet (provided) For rack installation, four mounting screws appropriate for your rack (not provided) For wall installation, four wall screws or anchors capable of supporting the full weight of the chassis, up to 12 lb (5.4 kg)	For rack installation, mounting screws appropriate for your rack (not provided). Routers with redundant power supplies require an AC power cord (provided) or DC power cables (not provided) for each power supply. Mounting brackets are preinstalled on J2320 and J2350 models, and must be installed on J4350 and J6350 models.	For CLI access: Management device, such as a PC or laptop, with a serial port (not provided) RJ-45 console (Ethernet “rollover”) cable, with an RJ-45-to-DB-9 adapter (both provided) For J-Web access: Management device, such as a PC or laptop, with an Ethernet port (not provided) Ethernet cable (not provided)

All Models

J2300 Model Only

All Other Models

Management Access

Electrostatic discharge (ESD) grounding strap (not provided)
For rack or wall installation, a screwdriver appropriate for the screws or anchors (not provided)
For AC power, an AC power cord with a plug appropriate for your geographical location (provided)
For DC power, 14 AWG DC power cables with appropriate lugs (not provided)
For grounding, 14 AWG grounding cable and lug for the router (not provided)

For desk installation, four rubber feet (provided)
For rack installation, four mounting screws appropriate for your rack (not provided)
For wall installation, four wall screws or anchors capable of supporting the full weight of the chassis, up to 12 lb (5.4 kg)

For rack installation, mounting screws appropriate for your rack (not provided).
Routers with redundant power supplies require an AC power cord (provided) or DC power cables (not provided) for each power supply.
Mounting brackets are preinstalled on J2320 and J2350 models, and must be installed on J4350 and J6350 models.

For CLI access:

Management device, such as a PC or laptop, with a serial port (not provided)
RJ-45 console (Ethernet “rollover”) cable, with an RJ-45-to-DB-9 adapter (both provided)

For J-Web access:

Management device, such as a PC or laptop, with an Ethernet port (not provided)
Ethernet cable (not provided)

Caution: A licensed electrician must attach a cable lug to the grounding and power cables that you supply. A cable with an incorrectly attached lug can damage the router.

If you are installing a J4350 or J6350 Services Router, take the following steps:

Attach the air filter and filter cover, as shown in Figure 1.
Figure 1: Attaching Air Filter and Filter Cover
Attach the mounting brackets to either the center or front of the chassis, as shown in Figure 2.
Figure 2: Attaching Mounting Brackets

[ Contents] [ Prev] [ Next] [ Report an Error]