[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]

TIM516 Analog Telephony Interface Module

The TIM516 Analog Telephony Interface Module (Figure 45), also known as the TIM516 analog media module, has 16 analog telephone lines.

Figure 45: TIM516 Analog Telephony Interface Module

Image g003866.gif

You can configure TIM516 lines as described in Table 43.

Table 43: TIM516 Possible Port Configurations

Possible Analog Telephone (LINE) Line Configurations
Analog tip/ring devices such as single-line telephones with or without LED message-waiting indication

The TIM516 also provides the following features:

Three ringer loads, the ringer equivalency number for up to 2,000 ft (610 m), for all 16 lines
Up to 16 simultaneously ringing lines
Type 1 caller ID and Type 2 caller ID for line lines
Ring voltage generation for a variety of international frequencies and cadences

For pinouts of cable connectors for the TIM516, see TIM516 Connector Pinout.

To install or remove an Avaya VoIP module, see Replacing a PIM.

TIM516 LEDs indicate link status and activity. Table 44 describes the meaning of the LEDs.

Table 44: LEDs for TIM516

Label	Color	State	Description
ALM	Red	On steadily	Alarm. A TIM516 failure requires monitoring or maintenance.
ACT	Yellow	Blinking	Active. A device connected to the TIM516 is in use. This situation can include a telephone that is off the hook.

For more information about the TIM516, see the Avaya manual Hardware Description and Reference for Avaya Communication Manager.

[ Contents] [ Prev] [ Next] [ Index] [ Report an Error]