When the system is powered on, the STATUS LED changes from off to blinking green. Startup takes approximately 90 seconds to complete. If you want to turn the system off and on again, we recommend waiting a few seconds between shutting it down and powering it back up. Table 8 describes the STATUS LED.
Table 8: J2320 and J2350 STATUS LED
| Color | State | Description |
|---|---|---|
|
Green |
Blinking |
Router is starting up or performing diagnostics. |
|
On steadily |
Router is operating normally. |
|
|
Red |
Blinking |
Error has been detected. |