J6350 Services Router Overview

The J6350 Services Router is designed primarily for regional or central offices. It has a chassis that is 2 U (rack units) in size with an optional redundant AC or DC power supply, up to 2 GB of memory, and two universal serial bus (USB) ports for external storage. The J6350 Services Router is a higher-performance system than the J4350 Services Router.

J6350 routers come standard with 1 GB of memory and can be upgraded to 2 GB of memory. For instructions on adding memory, see Replacing DRAM Modules.

Each J6350 chassis contains four built-in Gigabit Ethernet ports with link speeds of 10/100/1000 Mbps over a copper interface, and six slots for field-replaceable Physical Interface Modules (PIMs) and Avaya VoIP modules. Four of the six slots (slots 2, 3, 5, and 6) support high-speed interfaces (ePIMs).

The J6350 Services Router supports the following field-replaceable PIMs and Avaya VoIP modules:

• Gigabit Ethernet uPIM (1–port, 6-port, 8-port, and 16-port)
• SFP Gigabit Ethernet ePIM (1 port)
• Copper Gigabit Ethernet ePIM (1 port)
• Dual-Port Serial PIM
• Dual-Port E1 PIM
• Dual-Port T1 PIM
• E3 PIM (1 port)
• DS3 (T3) PIM (1 port)
• Dual-Port Fast Ethernet PIM
• Dual-Port Channelized T1/E1/ISDN PRI PIM
• 4-port Fast Ethernet ePIM
• G.SHDSL PIM (2 ports)
• 4-port ISDN BRI S/T or U PIM
• ADSL 2/2+ Annex A PIM (1 port)
• ADSL 2/2+ Annex B PIM (1 port)
• TGM550 Telephony Gateway Module
• TIM508 Analog Telephony Interface Module (8 ports)
• TIM510 E1/T1 Telephony Interface Module (1 port)
• TIM514 Analog Telephony Interface Module (4 ports)
• TIM516 Analog Telephony Interface Module (16 ports)
• TIM518 Analog Telephony Interface Module (16 ports)
• TIM521 ISDN BRI Telephony Interface Module (4 ports)