[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]
4-Port ISDN BRI PIMs
The 4-port ISDN BRI PIMs have four physical ports that support
the ISDN BRI S/T (Figure 36) or ISDN
BRI U (Figure 37) interface type.
Figure 36: ISDN BRI S/T PIM
Figure 37: ISDN BRI U PIM
ISDN BRI PIMs provide the following key features:
- Onboard network processor
- Bandwidth on demand
- Dial backup
- Dial-on-demand routing backup (floating static and dialer
watch)
For pinouts of cable connectors for ISDN PIMs, see ISDN RJ-45 Connector Pinout.
To install or remove a PIM, see Replacing a PIM.
ISDN LEDs indicate PIM and port status. Table 31 describes the meaning of the
LED states.
Table 31: LEDs for ISDN BRI S/T and U PIMs
|
Label
|
Color
|
State
|
Description
|
|
ONLINE
|
Green
|
Blinking
|
Call setup is successful on either the B1 or B2 channel.
|
|
Green
|
On steadily
|
ISDN Layer 2 is active.
|
|
Amber
|
On steadily
|
- ISDN Layer 1 is active.
- ISDN Layer 2 is unavailable.
|
|
Red
|
Disconnected
|
- BRI interface port is not connected.
- ISDN Layer 1 is unavailable.
|
|
Unlit
|
Off
|
BRI interface is offline.
|
|
STATUS
|
Green
|
On steadily
|
PIM is online and operational.
|
|
Red
|
Disconnected
|
PIM is not operational and needs replacement.
|
|
Unlit
|
Off
|
PIM is offline.
|
For alarms, see the configuring and monitoring alarms information
in the J-series Services Router Administration Guide.
[
Contents]
[
Prev]
[
Next]
[
Index]
[
Report an Error]