Verifying the RIP-Enabled Interfaces

Purpose

Verify that all the RIP-enabled interfaces are available and active.

Action

From the CLI, enter the show rip neighbor command.

Source          Destination     Send   Receive   In
Neighbor          State  Address         Address         Mode   Mode     Met 
--------          -----  -------         -----------     ----   -------  --- 
ge-0/0/0.0           Dn (null)          (null)          mcast  both       1
ge-0/0/1.0           Up 192.168.220.5   224.0.0.9       mcast  both       1

What it Means

The output shows a list of the RIP neighbors that are configured on the Services Router. Verify the following information:

• Each configured interface is present. Interfaces are listed in alphabetical order.
• Each configured interface is up. The state of the interface is listed in the Destination State column. A state of Up indicates that the link is passing RIP traffic. A state of Dn indicates that the link is not passing RIP traffic. In a point-to-point link, this state generally means that either the end point is not configured for RIP or the link is unavailable.

Related Topics

For a complete description of show rip neighbor output, see the JUNOS Routing Protocols and Policies Command Reference.