Verify that your configurations for the clear-channel interfaces are correct.
From the CLI, enter the show interfaces e1-3/0/1 command.
user@host> show interfaces e1-3/0/1
Physical interface: e1-3/0/1, Enabled, Physical link is Up
Interface index: 212, SNMP ifIndex: 237
Link-level type: PPP, MTU: 1504, Speed: E1, Loopback: None, FCS: 16,
Parent: ce1-3/0/1 Interface index 151
Device flags : Present Running
Interface flags: Point-To-Point SNMP-Traps Internal: 0x4000
Link flags : Keepalives
Keepalive settings: Interval 10 seconds, Up-count 1, Down-count 3
Keepalive: Input: 1066 (00:00:02 ago), Output: 1066 (00:00:02 ago)
LCP state: Opened
NCP state: inet: Opened, inet6: Opened, iso: Not-configured, mpls:
Not-configured
CHAP state: Closed
CoS queues : 8 supported, 8 maximum usable queues
Last flapped : 2006-10-06 01:01:36 PDT (02:57:27 ago)
Input rate : 88 bps (0 pps)
Output rate : 58144 bps (157 pps)
DS1 alarms : None
DS1 defects : None
Logical interface e1-3/0/1.0 (Index 66) (SNMP ifIndex 238)
Flags: Point-To-Point SNMP-Traps 0x4000 Encapsulation: PPP
Bandwidth: 1984kbps
Protocol inet, MTU: 1500
Flags: None
Addresses, Flags: Is-Preferred Is-Primary
Destination: 47.47.47.0/30, Local: 47.47.47.2, Broadcast: 47.47.47.3
Protocol inet6, MTU: 1500
Flags: None
Addresses, Flags: Is-Preferred Is-Primary
Destination: 8b8b:8b01::/64, Local: 8b8b:8b01::2
Addresses, Flags: Is-Preferred
Destination: fe80::/64, Local: fe80::205:85ff:fec5:d3d0
The output shows a summary of interface information. Although the parent interface is ce1-3/0/1, the physical and logical clear-channel interfaces are named e1-3/0/1 and e1-3/0/1.0.
For a complete description of show interfaces output, see the JUNOS Interfaces Command Reference.